How to reseal ETB

3 easy steps to reseal your Elite Trainer Boxes !

Reading time: 2-3 min

Step 1 : Insert

Start by placing the ETB inside the plastic bag upside down, ensuring the sealed edge is positioned the same way as the original factory seal. Make sure the sides and the bottom of the ETB are properly centered and aligned.

Elite Trainer Box sealed in an ultra-clear reseal plastic bag for clean factory-style display and protection.

Step 2 : Sealing

Make sure to always keep the sides and the bottom aligned with the plastic bag. Lay the ETB flat and seal the bag using a 20–30 cm heat sealer. You can find one for around €20 on Amazon.

Step 3 : Heating

Use a heat gun to shrink the bag. Keep a distance of about 15 cm and never stay in the same spot, as this could damage or puncture the plastic. Always keep the heat moving.

Start by placing the ETB on one side edge. Make sure the bag is properly aligned, then gently heat the corners and the bottom until the plastic tightens smoothly against the edge.

Rotate the ETB to another side, realign the bag, and lightly shrink the corners again.

Next, heat the bottom while keeping the bag aligned, without applying too much heat.

Continue heating evenly around the entire surface until the plastic is uniformly tight and smooth.

If you do not have a heat gun, a hair dryer can also be used.

Always work carefully and avoid overheating.

Tutorial & final Result

This product is designed to recreate a clean, factory-style appearance for ETBs. It was created for collectors who want to open their boxes, enjoy the contents, and reseal them for protection and display. Using this product to resell opened ETBs as new is strictly prohibited.

Thank you
for reading

By Team’s Rocket Vladimir